Part Number Hot Search : 
NTX1N AN44168A 3P4MH 74HCT147 155004U 11AA010 D25SB80 RH1078
Product Description
Full Text Search
 

To Download EL5611 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 (R)
EL5611, EL5811
Data Sheet August 3, 2005 FN7355.1
60MHz Rail-to-Rail Input-Output VCOM Amplifiers
The EL5611 and EL5811 are low power, high voltage rail-torail input-output amplifiers targeted primarily at VCOM applications in TFT-LCD displays. The EL5611 contains six amplifiers, and the EL5811 contains eight amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 2.5mA per amplifier, the EL5611 and EL5811 have a bandwidth of 60MHz (-3dB). They also provide common mode input ability beyond the supply rails, as well as rail-to-rail output capability. This enables these amplifiers to offer maximum dynamic range at any supply voltage. The EL5611 and EL5811 also feature fast slewing and settling times, as well as a high output drive capability of 65mA (sink and source). In addition to VCOM applications, these features make these amplifiers ideal for high speed filtering and signal conditioning application. Other applications include battery power, portable devices, and anywhere low power consumption is important. The EL5611 is available in 8-pin MSOP and 8-pin HMSOP packages. The EL5811 is available in space-saving 28-pin HTSSOP packages.These amplifiers operate over a temperature range of -40C to +85C.
Features
* 60MHz -3dB bandwidth * Supply voltage = 4.5V to 16.5V * Low supply current (per amplifier) = 2.5mA * High slew rate = 75V/s * Unity-gain stable * Beyond the rails input capability * Rail-to-rail output swing * 180mA output short current * Pb-Free plus anneal available (RoHS compliant)
Applications
* TFT-LCD panels * VCOM amplifiers * Drivers for A-to-D converters * Data acquisition * Video processing * Audio processing * Active filters * Test equipment * Battery-powered applications * Portable equipment
Ordering Information
PART NUMBER EL5611IRE EL5611IRE-T7 EL5611IRE-T13 EL5811IREZ (See Note) EL5811IREZ-T7 (See Note) EL5811IREZ-T13 (See Note) EL5811IREZ (See Note) EL5811IREZ-T7 (See Note) PACKAGE 24-Pin HTSSOP 24-Pin HTSSOP 24-Pin HTSSOP 28-Pin HTSSOP (Pb-free) 28-Pin HTSSOP (Pb-free) 28-Pin HTSSOP (Pb-free) 28-Pin HTSSOP (Pb-Free) 28-Pin HTSSOP (Pb-Free) TAPE & REEL 7" 13" 7" 13" 7" PKG. DWG. # MDP0048 MDP0048 MDP0048 MDP0048 MDP0048 MDP0048 MDP0048 MDP0048
Ordering Information (Continued)
PART NUMBER EL5811IREZ-T13 (See Note) PACKAGE 28-Pin HTSSOP (Pb-Free) TAPE & REEL 13" PKG. DWG. # MDP0048
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2004, 2005. All Rights Reserved All other trademarks mentioned are the property of their respective owners.
EL5611, EL5811 Pinouts
EL5611 (24-PIN HTSSOP) TOP VIEW
VOUTA 1 VINA- 2 VINA+ 3 VSS 4 VOUTB 5 VINB- 6 VINB+ 7 VDD 8 VINC+ 9 VINC- 10 VOUTC 11 NC 12 24 VDD 23 VOUTF 22 VINF21 VINF+ 20 VOUTE 19 VINE18 VINE+ 17 VSS 16 VOUTD+ 15 VOUTD14 VOUTD 13 NC
EL5811 (28-PIN HTSSOP) TOP VIEW
VDD 1 VINA+ 2 VINA- 3 VOUTA 4 VOUTB 5 VINB- 6 VINB+ 7 VINC+ 8 VINC- 9 VOUTC 10 VOUTD 11 VIND- 12 VIND+ 13 VDD 14 28 VINH+ 27 VINH26 VOUTH 25 VOUTG 24 VING23 VING+ 22 VSS 21 VSS 20 VINF+ 19 VINF18 VOUTF 17 VOUTE 16 VINE15 VINE+
2
FN7355.1 August 3, 2005
EL5611, EL5811
Absolute Maximum Ratings (TA = 25C)
Supply Voltage between VS+ and VS- . . . . . . . . . . . . . . . . . . . .+18V Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . VS- - 0.5V, VS +0.5V Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . . 65mA Maximum Die Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . +125C Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65C to +150C Ambient Operating Temperature . . . . . . . . . . . . . . . .-40C to +85C Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Electrical Specifications
PARAMETER INPUT CHARACTERISTICS VOS TCVOS IB RIN CIN CMIR CMRR AVOL
VS+ = +5V, VS- = -5V, RL = 1k to 0V, TA = 25C, Unless Otherwise Specified CONDITIONS MIN TYP MAX UNIT
DESCRIPTION
Input Offset Voltage Average Offset Voltage Drift (Note 1) Input Bias Current Input Impedance Input Capacitance Common-Mode Input Range Common-Mode Rejection Ratio Open-Loop Gain
VCM = 0V
3 7
15
mV V/C
VCM = 0V
2 1 2 -5.5
60
nA G pF
+5.5 70 70
V dB dB
for VIN from -5.5V to 5.5V -4.5V VOUT 4.5V
50 62
OUTPUT CHARACTERISTICS VOL VOH ISC IOUT Output Swing Low Output Swing High Short-Circuit Current Output Current IL = -5mA IL = 5mA 4.85 -4.92 4.92 180 65 -4.85 V V mA mA
POWER SUPPLY PERFORMANCE PSRR IS Power Supply Rejection Ratio Supply Current (Per Amplifier) VS is moved from 2.25V to 7.75V No load 60 80 2.5 3.75 dB mA
DYNAMIC PERFORMANCE SR tS BW GBWP PM CS dG dP NOTES: 1. Measured over operating temperature range. 2. Slew rate is measured on rising and falling edges. 3. NTSC signal generator used. Slew Rate (Note 2) Settling to +0.1% (AV = +1) -3dB Bandwidth Gain-Bandwidth Product Phase Margin Channel Separation Differential Gain (Note 3) Differential Phase (Note 3) f = 5MHz RF = RG = 1k and VOUT = 1.4V RF = RG = 1k and VOUT = 1.4V -4.0V VOUT 4.0V, 20% to 80% (AV = +1), VO = 2V step 75 80 60 32 50 110 0.17 0.24 V/s ns MHz MHz dB %
3
FN7355.1 August 3, 2005
EL5611, EL5811
Electrical Specifications
PARAMETER INPUT CHARACTERISTICS VOS TCVOS IB RIN CIN CMIR CMRR AVOL Input Offset Voltage Average Offset Voltage Drift (Note 4) Input Bias Current Input Impedance Input Capacitance Common-Mode Input Range Common-Mode Rejection Ratio Open-Loop Gain for VIN from -0.5V to 5.5V 0.5V VOUT 4.5V -0.5 45 62 66 70 VCM = 2.5V VCM = 2.5V 3 7 2 1 2 +5.5 60 15 mV V/C nA G pF V dB dB VS+ = +5V, VS- = 0V, RL = 1k to 2.5V, TA = 25C, Unless Otherwise Specified CONDITION MIN TYP MAX UNIT
DESCRIPTION
OUTPUT CHARACTERISTICS VOL VOH ISC IOUT Output Swing Low Output Swing High Short-circuit Current Output Current IL = -5mA IL = 5mA 4.85 80 4.92 180 65 150 mV V mA mA
POWER SUPPLY PERFORMANCE PSRR IS Power Supply Rejection Ratio Supply Current (Per Amplifier) VS is moved from 4.5V to 15.5V No load 60 80 2.5 3.75 dB mA
DYNAMIC PERFORMANCE SR tS BW GBWP PM CS dG dP NOTES: 4. Measured over operating temperature range. 5. Slew rate is measured on rising and falling edges. 6. NTSC signal generator used. Slew Rate (Note 5) Settling to +0.1% (AV = +1) -3dB Bandwidth Gain-Bandwidth Product Phase Margin Channel Separation Differential Gain (Note 6) Differential Phase (Note 6) f = 5MHz RF = RG = 1k and VOUT = 1.4V RF = RG = 1k and VOUT = 1.4V 1V VOUT 4V, 20% to 80% (AV = +1), VO = 2V step 75 80 60 32 50 110 0.17 0.24 V/s ns MHz MHz dB %
4
FN7355.1 August 3, 2005
EL5611, EL5811
Electrical Specifications
PARAMETER INPUT CHARACTERISTICS VOS TCVOS IB RIN CIN CMIR CMRR AVOL Input Offset Voltage Average Offset Voltage Drift (Note 7) Input Bias Current Input Impedance Input Capacitance Common-Mode Input Range Common-Mode Rejection Ratio Open-Loop Gain for VIN from -0.5V to 15.5V 0.5V VOUT 14.5V -0.5 53 62 72 70 VCM = 7.5V VCM = 7.5V 3 7 2 1 2 +15.5 60 15 mV V/C nA G pF V dB dB VS+ = +15V, VS- = 0V, RL = 1k to 7.5V, TA = 25C, Unless Otherwise Specified CONDITION MIN TYP MAX UNIT
DESCRIPTION
OUTPUT CHARACTERISTICS VOL VOH ISC IOUT Output Swing Low Output Swing High Short-circuit Current Output Current IL = -5mA IL = 5mA 14.85 80 14.92 180 65 150 mV V mA mA
POWER SUPPLY PERFORMANCE PSRR IS Power Supply Rejection Ratio Supply Current (Per Amplifier) VS is moved from 4.5V to 15.5V No load 60 80 2.5 3.75 dB mA
DYNAMIC PERFORMANCE SR tS BW GBWP PM CS dG dP NOTES: 7. Measured over operating temperature range 8. Slew rate is measured on rising and falling edges 9. NTSC signal generator used Slew Rate (Note 8) Settling to +0.1% (AV = +1) -3dB Bandwidth Gain-Bandwidth Product Phase Margin Channel Separation Differential Gain (Note 9) Differential Phase (Note 9) f = 5MHz RF = RG = 1k and VOUT = 1.4V RF = RG = 1k and VOUT = 1.4V 1V VOUT 14V, 20% to 80% (AV = +1), VO = 2V step 75 80 60 32 50 110 0.16 0.22 V/s ns MHz MHz dB %
5
FN7355.1 August 3, 2005
EL5611, EL5811 Typical Performance Curves
500 QUANTITY (AMPLIFIERS) 400 300 200 100 0
QUANTITY (AMPLIFIERS)
VS=5V TA=25C
TYPICAL PRODUCTION DISTRIBUTION
25 20 15 10 5 0
VS=5V
TYPICAL PRODUCTION DISTRIBUTION
-8
-6
-4
-2
-0
2
4
6
-12
-10
8
10
12
1
3
5
7
9
11
13
15
17
19
INPUT OFFSET VOLTAGE (mV)
INPUT OFFSET VOLTAGE DRIFT, TCVOS (V/C)
FIGURE 1. INPUT OFFSET VOLTAGE DISTRIBUTION
FIGURE 2. INPUT OFFSET VOLTAGE DRIFT
2 INPUT OFFSET VOLTAGE (mV) 1.5 1 0.5 0 -0.5 -50 INPUT BIAS CURRENT (A)
0.008 0.004 0 -0.004 -0.008
VS=5V
-10
30
70
110
150
-0.012 -50
-10
30
70
110
TEMPERATURE (C)
TEMPERATURE (C)
FIGURE 3. INPUT OFFSET VOLTAGE vs TEMPERATURE
FIGURE 4. INPUT BIAS CURRENT vs TEMPERATURE
4.96 OUTPUT HIGH VOLTAGE (V) 4.94 4.92 4.90 4.88 4.86 -50
OUTPUT LOW VOLTAGE (V)
VS=5V IOUT=5mA
-4.85 -4.87 -4.89 -4.91 -4.93
VS=5V IOUT=5mA
-10
30
70
110
150
-4.95 -50
-10
30
70
110
TEMPERATURE (C)
TEMPERATURE (C)
FIGURE 5. OUTPUT HIGH VOLTAGE vs TEMPERATURE
FIGURE 6. OUTPUT LOW VOLTAGE vs TEMPERATURE
6
FN7355.1 August 3, 2005
21 150 150
EL5611, EL5811 Typical Performance Curves (Continued)
75 OPEN-LOOP GAIN (dB)
VS=5V RL=1k SLEW RATE (V/s)
78 77 76 75 74 73
VS=5V
70
65
60 -50
-10
30
70
110
150
72 -50
-10
30
70
110
150
TEMPERATURE (C)
TEMPERATURE (C)
FIGURE 7. OPEN-LOOP GAIN vs TEMPERATURE
FIGURE 8. SLEW RATE vs TEMPERATURE
2.9 SUPPLY CURRENT (mA) 2.7 2.5 2.3 2.1 1.9 1.7 1.5 4
TA=25C SUPPLY CURRENT (mA)
2.7 2.65 2.6 2.55 2.5 2.45
VS=5V
8
12
16
20
2.4 -50
-10
30
70
110
150
SUPPLY VOLTAGE (V)
TEMPERATURE (C)
FIGURE 9. SUPPLY CURRENT PER AMPLIFIER vs SUPPLY VOLTAGE
FIGURE 10. SUPPLY CURRENT PER AMPLIFIER vs TEMPERATURE
0 DIFFERENTIAL PHASE () -0.02 DIFFERENTIAL GAIN (%) -0.04 -0.06 -0.08 -0.1 -0.12 -0.14 -0.16 -0.18 0 100 IRE 200 VS=5V AV=2 RL=1k
0.3 0.25 0.2 0.15 0.1 0.05 0 0 100 IRE 200
FIGURE 11. DIFFERENTIAL GAIN
FIGURE 12. DIFFERENTIAL PHASE
7
FN7355.1 August 3, 2005
EL5611, EL5811 Typical Performance Curves (Continued)
-30 -40 DISTORTION (dB) -50 -60 2nd HD -70 -80 -90 0 2 4 6 8 10 3rd HD VS=5V AV=2 RL=1k FREQ=1MHz GAIN (dB)
80 60 GAIN 40 20 0 -20 1K PHASE
250 190 130 70 10 -50 100M PHASE ()
10K
100K
1M
10M
VOP-P (V)
FREQUENCY (Hz)
FIGURE 13. HARMONIC DISTORTION vs VOP-P
FIGURE 14. OPEN LOOP GAIN AND PHASE
MAGNITUDE (NORMALIZED) (dB)
3 1 -1 -3
VS=5V AV=1 CLOAD=0pF
MAGNITUDE (NORMALIZED) (dB)
5
25 15 5 -5 -15 VS=5V AV=1 RL=1k 1M 10M 100M 1000pF 100pF 47pF 10pF
1k
560 150
-5 100K
1M
10M
100M
-25 100K
FREQUENCY (Hz)
FREQUENCY (Hz)
FIGURE 15. FREQUENCY RESPONSE FOR VARIOUS RL
FIGURE 16. FREQUENCY RESPONSE FOR VARIOUS CL
400 OUTPUT IMPEDANCE () 350 300 250 200 150 100 50 0 10K 100K 1M FREQUENCY (Hz) 10M 100M MAXIMUM OUTPUT SWING (VP-P)
12 10 8 6 4 2
0 10K
VS=5V AV=1 RL=1k DISTORTION <1% 100K 1M 10M 100M
FREQUENCY (kHz)
FIGURE 17. CLOSED LOOP OUTPUT IMPEDANCE
FIGURE 18. MAXIMUM OUTPUT SWING vs FREQUENCY
8
FN7355.1 August 3, 2005
EL5611, EL5811 Typical Performance Curves (Continued)
-15 -25 CMRR (dB) -35 -45 -55 -65 1K PSRR (dB)
-80 PSRR+ -60 PSRR-
-40
-20 VS=5V TA=25C 1K 10K 100K 1M 10M
10K
100K
1M
10M
100M
0 100
FREQUENCY (Hz)
FREQUENCY (Hz)
FIGURE 19. CMRR
FIGURE 20. PSRR
1K VOLTAGE NOISE (nV/Hz)
-60 -80 XTALK (dB) DUAL MEASURED CH A TO B QUAD MEASURED CH A TO D OR B TO C OTHER COMBINATIONS YIELD IMPROVED REJECTION
100
-100 -120 -140 VS=5V RL=1k AV=1 VIN=110mVRMS 10K 100K 1M 10M 30M
10
1 100
1K
10K
100K
1M
10M
100M
-160 1K
FREQUENCY (Hz)
FREQUENCY (Hz)
FIGURE 21. INPUT VOLTAGE NOISE SPECTRAL DENSITY
FIGURE 22. CHANNEL SEPARATION
100 80 OVERSHOOT (%) 60 40 20 0 10
STEP SIZE (V)
VS=5V AV=1 RL=1k VIN=50mV TA=25C
5 4 3 2 1 0 -1 -2 -3 -4 100 1K -5 55
VS=5V AV=1 RL=1k
0.1%
0.1%
65
75
85
95
105
LOAD CAPACITANCE (pF)
SETTLING TIME (ns)
FIGURE 23. SMALL-SIGNAL OVERSHOOT vs LOAD CAPACITANCE
FIGURE 24. SETTLING TIME vs STEP SIZE
9
FN7355.1 August 3, 2005
EL5611, EL5811 Typical Performance Curves (Continued)
VS=5V TA=25C AV=1 RL=1k VS=5V TA=25C AV=1 RL=1k
100mV STEP
1V STEP 50ns/DIV 50ns/DIV
FIGURE 25. LARGE SIGNAL TRANSIENT RESPONSE
FIGURE 26. SMALL SIGNAL TRANSIENT RESPONSE
Pin Descriptions
EL5611 1, 5, 9, 14, 20, 23 EL5811 4, 5, 10, 11, 17, 18, 25, 26 NAME VOUTx FUNCTION Amplifiers output EQUIVALENT CIRCUIT
VS+
GND CIRCUIT 1
VS-
2, 3, 6, 7, 9, 10, 15, 16, 21, 22
2, 3, 6, 7, 8, 9, 12. 13, 15, 16, 19, 20, 23, 24, 27, 28
VINx
Amplifiers input
VS+
VSCIRCUIT 2
8, 24 24, 17 12, 13
1, 14 21, 22
VS+ VSNC
Positive power supply Negative power supply Not connected
10
FN7355.1 August 3, 2005
EL5611, EL5811 Applications Information
Product Description
The EL5611 and EL5811 voltage feedback amplifiers are fabricated using a high voltage CMOS process. They exhibit rail-to-rail input and output capability, are unity gain stable and have low power consumption (2.5mA per amplifier). These features make the EL5611, and EL5811 ideal for a wide range of general-purpose applications. Connected in voltage follower mode and driving a load of 1k, the EL5611 and EL5811 have a -3dB bandwidth of 60MHz while maintaining a 75V/s slew rate. The EL5611 a six channel amplifier, and the EL5811 an 8 channel amplifier. continuous current never exceeds 65mA. This limit is set by the design of the internal metal interconnects.
Output Phase Reversal
The EL5611 and EL5811 are immune to phase reversal as long as the input voltage is limited from VS- -0.5V to VS+ +0.5V. Figure 28 shows a photo of the output of the device with the input voltage driven beyond the supply rails. Although the device's output will not change phase, the input's overvoltage should be avoided. If an input voltage exceeds supply voltage by more than 0.6V, electrostatic protection diodes placed in the input stage of the device begin to conduct and overvoltage damage could occur.
VS = 2.5V, TA = 25C, AV = 1, VIN = 6VP-P 1V 10s
Operating Voltage, Input, and Output
The EL5611and EL5811 are specified with a single nominal supply voltage from 5V to 15V or a split supply with its total range from 5V to 15V. Correct operation is guaranteed for a supply range of 4.5V to 16.5V. Most EL5611 and EL5811 specifications are stable over both the full supply range and operating temperatures of -40C to +85C. Parameter variations with operating voltage and/or temperature are shown in the typical performance curves. The input common-mode voltage range of the EL5611 and EL5811 extends 500mV beyond the supply rails. The output swings of the EL5611 and EL5811 typically extend to within 100mV of positive and negative supply rails with load currents of 5mA. Decreasing load currents will extend the output voltage range even closer to the supply rails. Figure 27 shows the input and output waveforms for the device in the unity-gain configuration. Operation is from 5V supply with a 1k load connected to GND. The input is a 10VP-P sinusoid. The output voltage is approximately 9.8VP-P.
VS = 5V, TA = 25C, AV = 1, VIN = 10VP-P 5V 10s
1V
FIGURE 28. OPERATION WITH BEYOND-THE-RAILS INPUT
Power Dissipation
With the high-output drive capability of the EL5611 and EL5811 amplifiers, it is possible to exceed the 125C 'absolute-maximum junction temperature' under certain load current conditions. Therefore, it is important to calculate the maximum junction temperature for the application to determine if load conditions need to be modified for the amplifier to remain in the safe operating area. The maximum power dissipation allowed in a package is determined according to:
T JMAX - T AMAX P DMAX = ------------------------------------------- JA
OUTPUT
INPUT
where: * TJMAX = Maximum junction temperature * TAMAX = Maximum ambient temperature * JA = Thermal resistance of the package * PDMAX = Maximum power dissipation in the package The maximum power dissipation actually produced by an IC is the total quiescent supply current times the total power supply voltage, plus the power in the IC due to the loads, or:
P DMAX = i [ V S x I SMAX + ( V S + - V OUT i ) x I LOAD i ]
5V
FIGURE 27. OPERATION WITH RAIL-TO-RAIL INPUT AND OUTPUT
Short Circuit Current Limit
The EL5611 and EL5811 will limit the short circuit current to 180mA if the output is directly shorted to the positive or the negative supply. If an output is shorted indefinitely, the power dissipation could easily increase such that the device may be damaged. Maximum reliability is maintained if the output
11
FN7355.1 August 3, 2005
EL5611, EL5811
when sourcing, and:
P DMAX = i [ V S x I SMAX + ( V OUT i - V S - ) x I LOAD i ]
POWER DISSIPATION (W) 1 0.9 JEDEC JESD51-3 LOW EFFECTIVE THERMAL CONDUCTIVITY TEST BOARD 909mW
when sinking, where: * i = 1 to 6 for EL5611 and 1 to 8 for EL5811 * VS = Total supply voltage * ISMAX = Maximum supply current per amplifier * VOUTi = Maximum output voltage of the application * ILOADi = Load current If we set the two PDMAX equations equal to each other, we can solve for RLOADi to avoid device overheat. Figures 29 and 30 provide a convenient way to see if the device will overheat. The maximum safe power dissipation can be found graphically, based on the package type and the ambient temperature. By using the previous equation, it is a simple matter to see if PDMAX exceeds the device's power derating curves. To ensure proper operation, it is important to observe the recommended derating curves shown in Figures 29 & 30.
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL CONDUCTIVITY TEST BOARD - HTSSOP EXPOSED DIEPAD SOLDERED TO PCB PER JESD51-5 3.5 POWER DISSIPATION (W) 3 3.030W 2.5 2 1.5 1 0.5 0 0 25 50 75 85 100 125 150 HTSSOP24 JA=33C/W HTSSOP28 JA=30C/W 3.333W
0.8 833mW 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 25 50 HTSSOP24 JA=120C/W
HTSSOP28 JA=110C/W
75 85 100
125
150
AMBIENT TEMPERATURE (C)
FIGURE 30. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE
Unused Amplifiers
It is recommended that any unused amplifiers in a dual and a quad package be configured as a unity gain follower. The inverting input should be directly connected to the output and the non-inverting input tied to the ground plane.
Power Supply Bypassing and Printed Circuit Board Layout
The EL5611 and EL5811 can provide gain at high frequency. As with any high-frequency device, good printed circuit board layout is necessary for optimum performance. Ground plane construction is highly recommended, lead lengths should be as short as possible and the power supply pins must be well bypassed to reduce the risk of oscillation. For normal single supply operation, where the VS- pin is connected to ground, a 0.1F ceramic capacitor should be placed from VS+ to pin to VS- pin. A 4.7F tantalum capacitor should then be connected in parallel, placed in the region of the amplifier. One 4.7F capacitor may be used for multiple devices. This same capacitor combination should be placed at each supply pin to ground if split supplies are to be used.
AMBIENT TEMPERATURE (C)
FIGURE 29. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com 12
FN7355.1 August 3, 2005


▲Up To Search▲   

 
Price & Availability of EL5611

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X